Table of Contents
Advertisement
7. Adjust the fold mirror until the black corners are visible.
8. Move the L1 lens until the corners and edges of the test pattern are sharp.
9. Tighten the lens screws but not fully.
10. Set the nominal position between each light module adjuster wheel and the metal base plate
by turning the wheel until you can just fit a 5 mm Allen key underneath it.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Optics
74
Hide quick links:
Advertisement
Table of Contents
