Projector Connections - Christie CP2208-LP Service Manual

Hide thumbs Also See for CP2208-LP:
Table of Contents

Advertisement

Projector connections

Item
Description
A
Indicates the status of the regulator. A solid blue LED indicates the regulator is enabled. If the LED is
not illuminated, the regulator is not enabled.
B
• SOFTST—(Software State) Indicates the state of the software application running on the
integrated cinema processor (ICP). During normal operation, this LED blinks. During start up, the
LED changes from off to blinking.
• OSST—(Operating System State) Indicates the state of the ICP operating system. During normal
operation, the LED is green. During start up, the LED changes from off to green.
• FMTST—(FMT FPGA State) Indicates the state of the FMT FPGA circuit. During normal operation,
the LED is green. When the power is turned on, the LED turns green immediately.
• ICPST—(ICP FPGA State) Indicates the configured state of the ICP FPGA circuit. During normal
operation, the LED is green. When the power is turned on, the LED turns green immediately.
C
• PORT B—Indicates the status of the USB port. A green LED indicates the port is active. If the
LED is not illuminated, the port is inactive.
• PORT A— Indicates the status of the USB port. A green LED indicates the port is active. If the
LED is not illuminated, the port is inactive.
D
• STBY—The LED is green when the standby power supply is active. If the LED is not illuminated,
the standby power supply has failed or the projector circuit breaker is off.
• RUN—The LED flashes green when the projector is operating normally. If the LED is not
illuminated or solid green, a communication, software, or hardware error has occurred. If the LED
is yellow, the projector cannot communicate with the touch panel controller (TPC).
• PIB—The LED is green when the projector intelligence board (PIB) is detected and operating
correctly. A red LED indicates a communication error. A flashing red LED indicates the PIB is not
installed correctly. If the LED is not illuminated, the PIB is inactive.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Service setups
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents