Christie CP2208-LP Service Manual page 19

Field
Target Color
Color Space
Gamma
LUT_CLUT
Scan Type
Automatic Scan Type Detection
Use PCT
PCT File
HDMI EDID Type
Enable 3D Dual Measured Color
e) If the channel is being created to display 3D content, tap 3D Control in the left pane.
f) Complete the following fields:
Field
Enable 3D
3D Test Patterns
3D Sync Input Mode
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Description
The target color gamut data (TCGD) value. Select Color
Verification.
The method of color decoding for the current source. The
default is YCbCr for all DVI sources. The default for all
cinema sources is Unity RGB. This option is not available
when Use PCF is selected in the Config 1 screen.
The gamma correction required for the proper tonal range
of the source material. This option is not available when
Use PCF is selected in the Config 1 screen.
Applies a 3D color cube for increased color accuracy. This
option is not available when Use PCF is selected in the
Config 1 screen.
The video scan type. The default is Progressive.
Automatically performs scan type detection. This feature is
supported for PIBS1 inputs only.
Applies Christie Pureformity Color Technology (PCT) to the
channel.
Identifies the Christie Pureformity Color Technology (PCT)
file associated with the channel.
Identifies the extended display identification data (EDID)
type used by the channel when playing content from a
device connected to the HDMI A/LEFT or HDMI B/RIGHT
ports.
Enables 3D Dual Measured Color on the channel. Select the
color files for the left and right eyes.
Description
Enables 3D.
Displays 3D test patterns.
Specifies whether a specific frame of input data has left eye
or right eye data.
Select Use White Line Code (true and inverted) if you
are using a single 3D input signal in which an embedded
white line at the bottom of each frame identifies left and
right, and an additional separate 3D stereo sync input at
the GPIO port is not present. The bottom row of the left-
eye sub-field should be pure white for the left-most 25% of
the pixel row and pure black for the remainder of the row.
The bottom row of the right-eye sub-field should be pure
white for the left-most 75% of the pixel row and pure black
for the remainder of the row.
Service setups
19