Product Labels; General Hazards - Christie CP2208-LP Service Manual

B
A
• Zone A—The light intensity may cause eye damage after a momentary or brief exposure
(before a person can avert his or her eye away from the light source). The light may cause
skin burns to occur.
• Zone B—The light intensity does not pose a hazard due to the eye's aversion response to bright
light. However, staring directly into the light may still be a hazard.
Projection lens
1.2-1.72:1, 0.69" DLPCine zoom
lens
1.33-2.1:1, 0.69" DLPCine zoom
lens
1.62-2.7:1, 0.69" DLPCine zoom
lens
2.09-3.9:1, 0.69" DLPCine zoom
lens

Product labels

Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.

General hazards

General hazard.
Electric shock hazard. To avoid personal injury, disconnect all power sources before
performing maintenance or service.
Electrocution hazard. To avoid personal injury, always disconnect all power sources before
performing maintenance or service procedures.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Part number
108-494108-XX
108-495109-XX
108-496100-XX
108-497101-XX
B
A
Zone A (m)
0 to 0.8
0 to 1.0
0 to 1.3
0 to 1.9
Service guidelines
Zone B (m)
0.8+
1.0+
1.3+
1.9+
13