Activating Marriage - Christie CP2208-LP Service Manual

h) To reassemble the projector, repeat steps f to a.
6. Replace the lens.

Activating marriage

You must complete marriage to display encrypted content and to comply with Digital Cinema System
Specification (the DCI specification).
You cannot complete marriage remotely. In addition, an authorized employee must be physically
present to verify that the anti-tamper seal on the card firewall is unbroken, the projector is unaltered,
and to tap the marriage button on the card cage faceplate.
1. On the touch panel controller (TPC), log on to the projector with marriage permissions.
2. Tap Menu > Service Setup > IMB Marriage.
3. Complete the Marriage wizard.
4. Tap Finish.
5. Verify that the marriage ring is installed correctly and an anti-tamper alarm does not appear
on the TPC.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Service setups
26