Table of Contents
Advertisement
11. Push the fan away from the locking screws until it unlocks and drops down.
12. To replace the fan, place it over the locking screws and pull towards you until it locks.
Locking screw position: unlocked
13. Complete the remaining steps in reverse order.
Replacing the light engine blower fan (fan 4)
The light engine blower fan receives filtered air from the front air filter and an intake duct.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Ventilation and cooling
Locking screw position: Locked
49
Hide quick links:
Advertisement
Table of Contents
