Replacing The Radiator Fans - Christie CP2208-LP Service Manual

Estimated replacement time: 22 minutes
1. Remove the exhaust skin (on page 38).
2. Loosen the four screws securing the LVPS cover.
3. Lift the protective cover and disconnect the LVPS fan harness connections from the inline
connector.
4. Remove the fan and fan guards from the mounting plate, off of the rubber standoffs.
5. To replace the fan, complete these steps in reverse order.

Replacing the radiator fans

The radiator fans (RAD TOP-R, RAD BOT-R, RAD TOP-M, RAD BOT-M, RAD TOP-L, and RAD BOT L)
provide cooling for the light module and radiator.
Estimated replacement time: 27 minutes per fan
1. Remove the top skin (on page 32).
2. Remove the rear skin (on page 37).
3. Remove the two screws securing the radiator cover.
4. Remove the four screws securing the radiator support bracket
5. Remove the radiator fan support bracket:
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Ventilation and cooling
52