Table of Contents
Advertisement
8. Loosen the two screws and remove the fire alarm interlock jumper.
9. Pull up the release screw and slide the card cage out along the guides using the handles.
Ensure the internal harnesses from the electronics do not get snagged or pinched against the
sides of the card cage assembly as it is being pulled out, as this can cause damage to the
wiring.
10. Tilt the card cage up and pull out to remove it.
11. To replace the card cage, complete these steps in reverse order.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Electronics
64
Hide quick links:
Advertisement
Table of Contents
