8. Pull the front skin forward to remove it.
9. To replace the front skin, complete these steps in reverse order.
Removing the touch panel controller
The touch panel controller (TPC) is a touch-sensitive screen used to control the projector, manage
sources, adjust the display, and view status information.
Estimated replacement time: 1.5 minutes
1. Disconnect the TPC interface cable from the port on the side of the projector.
2. Slide the mounting bracket from the bracket support.
3. Remove the mounting bracket from the TPC.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright
2016 Christie Digital Systems USA Inc. All rights reserved.
©
Projector covers and feet
35