Test Patterns; Adding Or Removing Preferred Test Patterns; Turning A Test Pattern On Or Off; Displaying A Full Screen Test Pattern - Christie CP2208-LP Service Manual

Test patterns

Use the projector to assist with configuration of the projector and to diagnose any issues that may
occur.

Adding or removing preferred test patterns

Add or remove test patterns from the Preferred Test Patterns pane.
1. On the touch panel controller (TPC), Log on to the projector with administrator or service
permissions.
2. Tap Menu > Administrator Setup > Preferred Test Pattern Setup.
3. To add a test pattern to the Preferred Test Pattern pane, tap and drag a test pattern from the
Unselected Patterns list to User Selected pane.
4. To remove a test pattern from the Preferred Test Pattern pane, tap and drag a test pattern
from the User Selected pane to the recycle bin in the bottom right corner.

Turning a test pattern on or off

Test patterns are available to assist with the configuration of the projector and to diagnose any issues
that may occur.
1. In the touch panel controller (TPC) task bar, tap the Test Pattern icon:
2. Tap All Test Patterns.
3. To turn a test pattern on, in the Preferred Test Patterns pane, tap the test pattern.
4. To turn the test pattern off, tap Test Pattern Off.

Displaying a full screen test pattern

Some test patterns fill the screen instead of a portion of it.
1. In the touch panel controller (TPC) task bar, tap the Test Pattern icon:
2. Tap All Test Patterns.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
87