Removing The High Security, Rear, And Light Engine Covers - Christie CP2208-LP Service Manual

Removing the high security, rear, and light
engine covers
The high security, rear, and light engine covers provide access to the light engine assembly and other
optical components.
Estimated replacement time: 1 minute
A High security cover
B Rear cover
C Light engine cover
1. Turn off the projector and disconnect it from AC power.
2. Remove the top skin (on page 32).
3. Unlock the high security cover with the high security key.
4. Loosen the two M4 captive screws on the rear cover.
5. Tilt the rear cover and slide it out.
6. Lift the high security cover up and out.
7. Remove the two screws connecting the light engine cover to the center structure.
8. Lift the light engine cover up and out.
9. To re-install the covers, complete these steps in reverse order.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Projector covers and feet
40