Christie CP2208-LP Service Manual page 71

6. Remove the six M6 hex head screws (A-F) securing the brackets that connect the light module
to the illumination optics system (IOS).
7. Disconnect the inline connectors of fans H-PIPE TOP (Fan 7), H-PIPE BOT (Fan 8), PSU EX R
(Fan 9) and PSU EX L (Fan 10) and release from the cable routing clamps.
8. Remove the two M4 hex heads screws securing the fan bracket for H-PIPE TOP (Fan 7), H-PIPE
BOT (Fan 8).
9. Disconnect the two quick disconnects between the light module and the radiator and pump and
release the tubing from the cable routing clamps.
10. Disconnect the following connections from the laser driver board:
• CN200
• CN206
• CN207
• CN208
• CN209
• CN220
• CN806
• CN809
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Optics
71