Replacing The Ac Input Assembly - Christie CP2208-LP Service Manual

Replacing the AC input assembly

The AC input assembly is located at the rear of the projector.
Estimated time to replace: 20 minutes
1. Unplug the projector.
2. Remove the top skin (on page 32).
3. Remove the rear skin (on page 37).
4. Reach into the projector and unplug the AC input assembly harnesses from fuse board A and
fuse board B.
The fuse boards are located in front of the radiator fan pack assembly.
5. Remove the two screws securing the metal baffle mounted underneath the AC input assembly,
and remove it.
6. Remove the two counter sunk screws (A) on the AC mounting bracket.
7. Remove the two 3 mm hex head screws (B) securing the AC mounting bracket.
CP2208-LP Service Manual
020-102263-01 Rev. 1 (09-2016)
Copyright 2016 Christie Digital Systems USA Inc. All rights reserved.
©
Power supplies
83