Download  Print this page

Advertisement

Configuring LOGO!
5.2 Setting the default values for LOGO!
To set the backlight choice in parameter assignment mode:
1. Select parameter assignment mode.
2. On the parameter assignment menu,
select 'Set': Press
3. Confirm 'Set..': Press OK
4. On the Set menu, select 'LCD': Press
5. Confirm 'LCD..': Press OK
6. Move the '>' cursor to 'BackLight': Press
7. Confirm 'BackLight': Press OK
8. Move the '>' cursor to 'Default' or 'AlwaysOn': Press
The default is that the backlight is not on. To set the backlight to always be on, select the
'AlwaysOn' choice.
To set the backlight choice in programming mode:
If you want to set the backlight choice in programming mode, select 'Setup' in the main
menu, then menu 'LCD'. You can now set the backlight choice as described earlier (as of
step 6.).
Note: The backlight lifetime of the LOGO! TD is 20,000 hours.
5.2.3

Setting the menu language

The language of the LOGO! menus can be one of ten predefined languages:
CN (Chinese)
IT (Italian)
To set the menu language in parameter assignment mode:
1. Select parameter assignment mode (Page 215).
2. On the parameter assignment menu,
select 'Set': Press
3. Confirm 'Set..': Press OK
4. On the Set menu, select 'Menu Lang': Press
5. Confirm 'Menu Lang': Press OK
6. Move the '>' cursor to the language
of your choice: Press
7. Confirm language selection. Press OK
224
or
DE (German)
EN (English)
NL (Dutch)
RU (Russian)
or
or
or
or
or
ES (Spanish)
TR (Turkish)
or
Manual, 10/2017, A5E01248535-AA
FR (French)
JP (Japanese)
LOGO!

Advertisement

   Also See for Siemens LOGO!

   Related Manuals for Siemens LOGO!

Comments to this Manuals

Symbols: 0
Latest comments: