4.4 Special functions list - SF
This special function outputs one of four predefined analog values or 0 at the analog output.
Symbol in LOGO!
A change in status from 0 to 1 at input En (Enable)
switches a parameterized analog value to the output
AQ, depending on the value of S1 and S2.
Inputs S1 and S2
S1 and S2 (selectors) for selecting the analog value
to be issued.
V1...V4: Analog values that will be issued.
Range of values: -32768...+32767
p: Number of decimals
Range of values: 0, 1, 2, 3
This special function has an analog output. This out-
put can only be connected with the analog input of a
function, an analog flag or an analog output connect-
or (AQ1, AQ2).
Range of values for AQ:
S1 = 0 and S2 = 0:
Value 1 is issued
S1 = 0 and S2 = 1:
Value 2 is issued
S1 = 1 and S2 = 0:
Value 3 is issued
S1 = 1 and S2 = 1:
Value 4 is issued
Manual, 10/2017, A5E01248535-AA