The threshold trigger measures the signals at input Fre. The pulses are recorded across a
configurable time G_T.
Output Q is set and reset in accordance with the set thresholds. See the calculation rule
● If the On threshold ≥ Off threshold, then:
Q = 1, if f
Q = 0, if f
● If the On threshold < Off threshold, then Q = 1 if
On ≤ f
Setting the Par parameter
The system scans the counter limit value once per interval G_T.
View in programming mode (example):
Manual, 10/2017, A5E01248535-AA
4.4 Special functions list - SF