Siemens LOGO! Manual page 216

Configuring LOGO!
5.1 Selecting parameter assignment mode
LOGO! changes to parameter assignment mode and opens the parameter assignment
menu:
Description of the four menu items of the parameter assignment menu
● Stop
You select this command to stop your circuit program and thus change to the main menu of
programming mode. To do so:
1. To move the '>' cursor to 'Stop': Press
2. To confirm 'Stop': Press OK
3. To move the '>' cursor to 'Yes': Press
4. To confirm 'Yes': Press OK
LOGO! shows the main menu of the programming mode:
● Set Param
For information on the various parameters, refer to the topics "Parameters (Page 217)",
"Selecting the parameters (Page 218)", and "Modifying parameters (Page 219)".
● Set..
For information on the various settings, refer to the topic "Setting the default values for
LOGO!".
● Prg Name
This menu command only allows you to read the name of your circuit program. It is not
possible to modify this name in parameter assignment mode (Page 75).
216
or
or
Manual, 10/2017, A5E01248535-AA
LOGO!