Download  Print this page

Advertisement

LOGO! shows the following display:
LOGO! indicates that European S/W Time conversion is enabled.
User-defined parameters
If none of the parameters/conversions apply to your country, you can customize these under
menu item '. .'. To do so:
1. Confirm 'On' once again: Press OK
2. Move the '>' cursor to '. .': Press
3. Confirm the menu item '. .' : Press OK
The display shows:
Let us assume you want to configure the following parameters: Start of summertime = 31st
March, end of summertime = 1st November, time difference of 120 minutes.
This is how you can enter your data:
● Press
● Press
The display shows:
● Confirm all your entries with OK.
LOGO!
Manual, 10/2017, A5E01248535-AA
or
to move the solid square/cursor.
and
to change the value at the cursor position.
3.7 Writing and starting the circuit program
or
Programming LOGO!
95

Advertisement

   Also See for Siemens LOGO!

   Related Manuals for Siemens LOGO!

Comments to this Manuals

Symbols: 0
Latest comments: