Selecting The Parameters - Siemens LOGO! Manual

Configuring LOGO!
5.1 Selecting parameter assignment mode
5.1.2

Selecting the parameters

To select a parameter:
1. On the parameter assignment menu, select
'Set Param': Press
2. Confirm with OK.
LOGO! shows the first parameter. If no parameter can be set, you can press ESC to
return to the parameter assignment menu.
3. Now, select the desired parameter: Press
4. Select the parameter you want to edit, and press OK.
218
or
or
Manual, 10/2017, A5E01248535-AA
LOGO!