3.8 Memory space and circuit program size
*: Bytes in the Rem memory area if retentivity is enabled.
Utilization of memory areas
The system indicates that there is insufficient memory space by not allowing you to add a
further block to your circuit program. LOGO! offers you only the blocks for which it can
provide sufficient memory space. If LOGO! memory space is insufficient to hold any further
blocks you select from a block list, the system will deny access to this list.
If memory space is fully occupied, optimize your circuit program or install a second LOGO!
Calculating memory requirements
When calculating the memory requirements of a circuit, you must always take into account
all individual areas of memory.
Manual, 10/2017, A5E01248535-AA