LOGO! memory and battery cards
6.2 Inserting and removing memory and battery cards
To remove a battery card, or combined memory/battery card, slide a screwdriver with a 3-
mm blade into the slot on the upper surface of the card until it engages in the back, then with
the screwdriver engaged, pull the card out with your hand.
Inserting a memory card, battery card or combined memory/battery card
The entry of the memory card, battery card and the combined memory/battery card slot is
chamfered on its bottom right. The edge of the cards is chamfered accordingly. This
encoding prevents you from inserting cards the wrong way. Insert the memory card, battery
card or combined memory/battery card into the slot and push it in until it engages.
Manual, 10/2017, A5E01248535-AA