Siemens LOGO! Manual page 73

The first element of the Co list is the "Input 1" character, namely "I1".
Note
Press
lo, hi, ... to I1.
Inputs F1, F2, F3, and F4 are new as of the 0BA6 device series. They correspond to the four
function keys on the optional LOGO! TD.
Press OK. I1 is now connected to the input of the OR block. The cursor jumps to the next
input of the OR block.
Now you connect input I2 to the input of the OR block:
1. Switch to editing mode: Press OK
2. Select the Co list: Press
3. Confirm the Co list with: Press OK
4. Select I2: Press
5. Apply I2: Press OK
I2 is now connected to the input of the OR block:
LOGO!
Manual, 10/2017, A5E01248535-AA
to go to the start of the Co list: I1, I2 ... to lo. Press
or
or
Programming LOGO!
3.7 Writing and starting the circuit program
to go to the end of the Co list:
73