Servicing Crus That Require Server Node Power Off; Server Node Cru Component Locations - Oracle Database Appliance X7-2M Service Manual

Servicing CRUs That Require Server Node Power Off

REAR HDD/PS/FAN LED located on the front of both server nodes
■
See "Storage and Boot Drive Locations" on page 153
LEDs.
Servicing CRUs That Require Server Node Power Off
This section describes how to service customer-replaceable units (CRUs) for Oracle Database
Appliance Version 1. If you have Oracle Database Appliance X6-2 series, go to
Oracle Database Appliance X6-2 Series CRUs" on page
Appliance X3-2, Oracle Database Appliance X4-2, or Oracle Database Appliance X5-2, go to
"Servicing Oracle Database Appliance X3-2/X4-2/X5-2 CRUs" on page
This section includes information on how to service the following Oracle Database Appliance
Version 1 CRUs:
"Server Node CRU Component Locations" on page 166
■
"Servicing Memory Modules (DIMMs) (CRU)" on page 168
■
"Servicing PCIe Risers (CRU)" on page 177
■
"Servicing PCIe Cards (CRU)" on page 182
■
"Servicing the Server Node Battery (CRU)" on page 191
■

Server Node CRU Component Locations

Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
Each server node (also called a system controller) in Oracle Database Appliance Version 1
includes the following replaceable components.
166 Oracle Database Appliance Service Manual • November 2017
Information in this appendix does NOT apply to Oracle Database Appliance X3-
for more information about system
102. If you have Oracle Database
103.
"Servicing