Configuring Option Rom Settings In Bios - Oracle Database Appliance X7-2M Service Manual

Enable or Disable Option ROM Settings
6. After making the necessary changes, select Commit and press Enter to apply the
changes.
Press F10 to save the changes and exit BIOS.
7.

Configuring Option ROM Settings in BIOS

Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
The Oracle Database Appliance Version 1 BIOS Option ROM space is 128 Kbytes. Of these
128 Kbytes, approximately 80 Kbytes are used by the VGA controller, the disk controller, and
the network interface card. Approximately 48 Kbytes remain to be shared by the Option ROMs
on all bootable PCI-Express plug-in cards.
Enable or Disable Option ROM Settings
Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
1. Access the BIOS Setup Utility menus.
For instructions, see
In the BIOS Setup Utility menus, use the arrow keys (or Tab key) to navigate to
2.
the Boot menu.
268 Oracle Database Appliance Service Manual • November 2017
Information in this appendix does NOT apply to Oracle Database Appliance X3-
Information in this appendix does NOT apply to Oracle Database Appliance X3-
"Accessing the BIOS Setup Utility Menus" on page 270.