Servicing The Boot Disk Backplane (Fru) - Oracle Database Appliance X7-2M Service Manual

Install Processor (CPU)
Oracle ILOM lists all known faults, for example:
SP/faultmgmt
Targets:
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
c. To clear the fault, type the following command:
->
set /SYS/MB/P
For example, to clear a fault on P0:
-> set /SYS/MB/P0 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 (y/n)? y
Set 'clear_fault_action' to 'true'

Servicing the Boot Disk Backplane (FRU)

Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
The Oracle Database Appliance Version 1 boot disk backplane (BDB) serves as an interface
between the motherboard and the rear-mounted disk drives.
The boot disk backplane is a FRU and can only be replaced by an Oracle-qualified service
technician.
Caution -
sensitive to static discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow antistatic practices as described in
and Antistatic Prevention Measures" on page
This section includes:
"Remove Boot Disk Backplane" on page 205
■
204 Oracle Database Appliance Service Manual • November 2017
n
clear_fault_action=true
Information in this appendix does NOT apply to Oracle Database Appliance X3-
Equipment damage. These procedures require that you handle components that are
"Performing Electrostatic Discharge
146.