Servicing CRUs That Require Compute Node
Power Off
These sections describe how to service customer-replaceable units (CRUs) for MiniCluster
that require you to power off the compute node. All of these CRUs are located on the compute
nodes.
Note -
fans is described in
Servicing Compute Node CRUs
This section describes how to service customer-replaceable units (CRUs) for the compute nodes
that require you to power off the server.
Note -
while the power is on. See
array component replacement procedures.
Note -
to the SPARC S7-2 documentation library. Use your browser's Back button to return to the
MiniCluster library.
"Servicing DIMMs" in SPARC S7-2 Server Service Manual
■
"Servicing the Battery" in SPARC S7-2 Server Service Manual
■
"Servicing PCIe Cards" in SPARC S7-2 Server Service Manual
■
"Servicing the Front Indicator Module" in SPARC S7-2 Server Service Manual
■
"Servicing the eUSB Drive" in SPARC S7-2 Server Service Manual
■
The servicing of hot-swap components such as the HDDs, SSDs, power supplies, and
"Servicing CRUs That Do Not Require System Power Off" on page
All of the CRUs on the storage array and the storage expansion shelf can be replaced
"Storage Array Hot-Swappable Components" on page 18
The links in the following list take you to instructions outside of the MiniCluster library
Servicing CRUs That Require Compute Node Power Off
17.
for storage
31