Oracle Database Appliance X7-2M Service Manual page 176

Install DIMMs
7. Return the server node to operation.
a. Install the server node top cover.
See
Install the server node into the system.
b.
See
c. Power on the server node.
See
8. Clear the DIMM faults.
a.
Log in to the server node Oracle ILOM CLI as root.
b. To view server node faults, type the following command:
->
Oracle ILOM lists all known faults. For example:
SP/faultmgmt
Targets:
0 (/SYS/MB/P0/D2)
Properties:
Commands:
cd
show
c. To clear the DIMM fault, type the following command:
->
For example, to clear a fault on the DIMM in location D2 on CPU0:
-> set /SYS/MB/P0/D2 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 (y/n)? y
Set 'clear_fault_action' to 'true'
176 Oracle Database Appliance Service Manual • November 2017
"Installing the Server Node Top Cover" on page
"Installing a Server Node Into the System Chassis" on page
"Powering On Oracle Database Appliance Version 1" on page
show /SP/faultmgmt
n
set /SYS/MB/Px/D clear_fault_action=true
245.
246.
249.