Oracle Database Appliance X7-2M Service Manual page 205

"Install Boot Disk Backplane" on page 206
■
Remove Boot Disk Backplane
Information in this appendix does NOT apply to Oracle Database Appliance X3-
Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes removing the boot disk backplane from Oracle Database Appliance
Version 1.
Prepare the server node for service.
1.
a. Attach an antistatic wrist strap.
See "Performing Electrostatic Discharge and Antistatic Prevention
Measures" on page
b. Remove the server node from the system.
Power is removed from the server node when you remove it from the system. See
"Removing Server Nodes From the System Chassis" on page
c. Remove the server node top cover.
See "Removing the Server Node Top Cover" on page
2. Unseat the boot disk drives.
See "Remove a Boot Drive" on page
Remove the boot disk backplane.
3.
146.
157.
Appendix A • Servicing the Oracle Database Appliance Version 1
Remove Boot Disk Backplane
147.
149.
205