Servicing Processors (Cpus) (Fru) - Oracle Database Appliance X7-2M Service Manual

Servicing Processors (CPUs) (FRU)

Information in this appendix does NOT apply to Oracle Database Appliance X3-
Note -
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section includes information on servicing CPUs in Oracle Database Appliance Version 1.
The CPU is a FRU and can only be replaced by an Oracle-qualified service technician.
Equipment damage. These procedures require that you handle components that are
Caution -
sensitive to static discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow antistatic practices as described in
and Antistatic Prevention Measures" on page
This section includes the following topics:
"Remove Processor (CPU)" on page 197
■
"Install Processor (CPU)" on page 201
■
Remove Processor (CPU)
Note - Information in this appendix does NOT apply to Oracle Database Appliance X3-
2, Oracle Database Appliance X4-2, Oracle Database Appliance X5-2 or Oracle Database
Appliance X6 series. Refer to the preceding chapters in this document for information on
servicing those systems.
This section describes removing a processor from Oracle Database Appliance Version 1.
1. Prepare the server node for service.
Attach an antistatic wrist strap.
a.
See "Performing Electrostatic Discharge and Antistatic Prevention
Measures" on page
b. Remove the server node from the system.
146.
146.
Appendix A • Servicing the Oracle Database Appliance Version 1
Remove Processor (CPU)
"Performing Electrostatic Discharge
197