Resetting The Service Processor - Oracle Database Appliance X7-2M Service Manual

Resetting the Service Processor

There are times when you might need to reset the service processor (such as after a firmware
update). You can reset the server node SP using Oracle ILOM without affecting the host OS.
However, this action disconnects your current Oracle ILOM session and will not allow any new
sessions to be initiated until the reset has completed.
To reset the SP using the Oracle ILOM web interface or the CLI, see Oracle Integrated Lights
Out Manager (ILOM) Documentation Library:
http://www.oracle.com/goto/ILOM/docs
Note -
supported with your appliance. See the "Supported Components and Capabilities" section in the
Oracle Database Appliance Owner's Guide.
If you are unable to reset the SP using the Oracle ILOM web interface or the CLI (for example,
if the SP hangs), then use the SP reset button as described in the following tables.
Note -
Appliance library. Use your browser's Back button to return to the Oracle Database Appliance
library.
For Oracle Database Appliance X7-2 series:
Oracle Database Appliance X7-2S/X7-2M
Reset the Service Processor From the Server Back Panel
For Oracle Database Appliance X6-2 series:
Oracle Database Appliance X6-2S/
X6-2M
Reset the Service Processor From the
Server Back Panel
For Oracle Database Appliance X3-2X4-2/X5-2 and Oracle Database Appliance Version 1:
Be sure to refer to the documentation that applies to the version of Oracle ILOM
The links in the following tables take you to instructions outside of the Oracle Database
Chapter 7 • Server Node Diagnostic Tools and Resetting the Service Processor
Oracle Database Appliance X7-2-HA
Reset the Service Processor From the Server Back Panel
Oracle Database Appliance X6-2L
Reset the Service Processor From the
Server Back Panel
Resetting the Service Processor
Oracle Database Appliance X6-2-HA
Reset the Service Processor From the
Server Back Panel
131