Oracle Database Appliance X7-2M Service Manual page 40

Oracle Database Appliance X5-2 Status Indicators
Callout
4
5
6
7
8
9
10
11
40 Oracle Database Appliance Service Manual • November 2017
Indicator/LED: Color
Power button
Top fan: amber
Rear PS: amber
Over temperature warning:
amber
Service processor (SP): green
Drive OK: green
Drive Service Required: amber
Drive Ready-to-Remove: blue
State Meaning
following states: 1) the server host is booting the operating
system (OS), 2) the server host is running the OS.
■ Off – AC power is not present or the Oracle ILOM boot is not
complete.
■ Steady blink – Standby power is on, but the chassis power is off
and the Oracle ILOM SP is running.
■ Slow blink – Startup sequence has been initiated on the host.
This pattern should begin soon after you power on the server.
This status indicates either: (1) POST code checkpoint tests are
running on the server host system, or (2) the host is transitioning
from the powered-on state to the standby state on shutdown.
Press to apply full power. Press again to turn main power off, but
leave standby power on the Oracle ILOM.
Indicates that one (or more) of the internal fan modules has failed.
■ Off – Indicates steady state; no service is required.
■ On – Indicates service required; service the failed fan module.
Indicates that one (or more) of the power supplies has failed.
■ Off – Indicates steady state; no service is required.
■ On – Indicates service required; service the failed power supply.
■ Off – Normal operation; no service is required.
■ On – The system is experiencing an over temperature warning
condition.
Note - This is a warning indication, not a fatal over temperature.
Failure to correct this condition might result in the system
overheating and shutting down unexpectedly.
■ Off – The service processor (SP) is not running.
■ On – The SP is fully operational.
■ Slow blink – SP is booting.
■ Off – Power is off or the installed drive is not recognized by the
system.
■ On – The drive is engaged and is receiving power.
■ Random blink – There is disk activity. The indicator blinks on
and off to indicate activity.
■ Off – The storage drive is operating normally.
■ On – The system has detected a fault with the storage drive.
■ Off – The storage drive has not been prepared for removal.
■ On – The storage drive can be removed safely during a hot-plug
operation.