Dc Power Adaptor; Figure 2-3 The Omniscan Mx2 Dc Power Adaptor Plug - Olympus OmniScan MX User Manual

DMTA-20015-01EN [U8778402], Rev. M, February 2017
2.3.1

DC Power Adaptor

You can operate the OmniScan MX2 on AC power using the DC power adaptor (P/N:
OMNI-A-AC [U8767093]). The OMNI-A-AC has a universal AC power input, which
operates with any line voltage from 100 VAC to 120 VAC or from 200 VAC to
240 VAC, and at 50 Hz to 60 Hz line frequency.
To use AC power
1. Connect the AC power cord to the DC power adaptor (P/N: OMNI-A-AC
[U8767093]) and to an appropriate power outlet.
Use only the AC power cord supplied with the OmniScan MX2. Do not use this AC
power cord with other products.
2. On the right-hand side of the OmniScan MX2, lift the rubber seal covering the DC
adaptor connector plug (see Figure 2-3 on page 38).

Figure 2-3 The OmniScan MX2 DC power adaptor plug

38 Chapter 2
CAUTION
DC power adaptor plug