Figure M-3 The Olympus Eca Probe Connector; Figure M-4 The 19-Pin Eddy Current Probe Connector; Figure M-5 An Eddy Current Probe Bnc Connector - Olympus OmniScan MX User Manual

DMTA-20015-01EN [U8778402], Rev. M, February 2017
• The second type is a 19-pin connector (see Figure M-4 on page 182) used in
multiple-coil eddy current technology probes.

Figure M-4 The 19-pin eddy current probe connector

The references for this connector are found in "4CH Connector References" on
page 183, "4CH Connector References."
• The third type is a BNC connector (see Figure M-5 on page 182), used in certain
single-coil eddy current technology probes.
182 Appendix M

Figure M-3 The Olympus ECA probe connector

Figure M-5 An eddy current probe BNC connector