Acquisition Indicator Light; Table 17 Power Indicator Light Statuses; Table 18 Acquisition Indicator Light Statuses - Olympus OmniScan MX User Manual

Off
Green
Orange
Flashing orange/green
Flashing orange/red
Flashing red
7.1.9.3

Acquisition Indicator Light

The acquisition indicator light is located to the left of the Start/Stop key (
color of this light indicates the OmniScan MX operating mode (see Table 18 on
page 83).
Off
Flashing orange
NOTE
If an acquisition module is removed while the OmniScan MX is turned on, the
keypad, power, and acquisition indicator lights flash red for a few seconds, and then
the unit automatically shuts down to prevent damage to the internal circuits.

Table 17 Power indicator light statuses

The OmniScan MX is turned off.
The instrument is ready (start-up
complete).
Battery charging is complete.
The OmniScan MX is shut off. Battery A is
charging.
The OmniScan MX is shut off. Battery B is
charging.
Critical factor (temperature, very weak
battery, etc.)

Table 18 Acquisition indicator light statuses

Acquisition mode
Paused analysis mode
DMTA-20015-01EN [U8778402], Rev. M, February 2017
Overview of the Equipment
). The
83