Olympus OmniScan MX User Manual page 74

DMTA-20015-01EN [U8778402], Rev. M, February 2017
Table 10 OmniScan MX2 general specifications (continued)
USB ports
Video output
Ethernet
Encoder
Digital input
Digital output
Remote communication
Acquisition on/off switch Remote acquisition enable TTL, 5 V
Power output line
62 Chapter 5
I/O ports
2 USB ports compliant with USB 2.0
a
specifications: OTG (On-the-Go) USB, USB
High Speed (HS)
1 USB port compliant with USB 1.1
specifications: USB full-speed (FS)
USB HS and OTG USB (host mode) can
operate at high speed, full speed, and low
speed
USB FS can operate at full speed and low
speed
Theoretical speed:
HS: 480 Mbps (megabits per second)
FS: 12 Mbps
LS: 1.5 Mbps
Video out (SVGA)
10/100 Mbps
I/O lines
2-axis encoder line (quadrature or
clock/direction)
4 digital inputs TTL, 5 V
4 digital outputs TTL, 5 V, 15 mA maximum
per output
Remote communication RS-232: 2 serial
ports using 3-wire RS-232
5 V nominal, 500 mA maximum, shared
between both Serial Out connector and
Scanner connector power output (short-
circuit protected)