Acquisition Specifications; Data Specifications; Table 53 Acquisition Specifications - Omni-M-Pa32128Pr; Table 54 Data Specifications - Omni-M-Pa32128Pr - Olympus OmniScan MX User Manual

I.2

Acquisition Specifications

This section lists the acquisition specifications for frequency, data display, and
synchronization (see Table 53 on page 163).
Table 53 Acquisition specifications — OMNI-M-PA32128PR
Digitizing frequency
A-scan (acquisition
mode)
Maximum pulsing rate
Depth in material
Refresh rate
Envelope (echo-dynamic
mode)
On internal clock
External pace
On encoder
I.3

Data Specifications

This section details the data specifications of processing, TCG, and storage (see
Table 54 on page 163).
Table 54 Data specifications — OMNI-M-PA32128PR
Number of data points
Real-time averaging
Rectification
DMTA-20015-01EN [U8778402], Rev. M, February 2017
Frequency
100 MHz (10 bits)
Up to 6000 A-scans per second (512-point,
8-bit A-scan)
Up to 10 kHz (C-scan)
59.8 meters in steel (longitudinal wave),
10 ms with compression
0.49 meter in steel (longitudinal wave),
81.9 µs without compression
Display
A-scan: 60 Hz; S-scan: 20 Hz to 30 Hz
Yes: Volume-corrected S-scan (30 Hz)
Synchronization
1 Hz to 10 kHz
Yes
On 2 axes: from 1 step to 65536 steps
Processing
Up to 8000
2, 4, 8, and 16
RF, full wave, half wave+, half wave−
OMNI-M-PA32128PR Module Specifications 163