Omniscan Software Installation; Figure 8-5 The Omniscan Mx Connection Diagram Indicating Where To Attach Ferrite Clamp Filters - Olympus OmniScan MX User Manual

DMTA-20015-01EN [U8778402], Rev. M, February 2017
Keyboard
connection
Mouse
connection
LAN
connection
Probe
connection
OmniScan MX connector
on module
Figure 8-5 The OmniScan MX connection diagram indicating where to attach
8.4

OmniScan Software Installation

The OmniScan software installation is designed to be as trouble-free as possible. The
software is stored on a CompactFlash card.
If you are using multiple technologies (conventional ultrasonics, phased arrays,
conventional eddy current testing, eddy current arrays), it is possible to obtain a
single CompactFlash card containing all the software programs.
During upgrades to new versions, a message appears on the screen to inform you that
the upgrade is taking place. However, no action is required on your part.
Refer to the Olympus website for software updates and all related, applicable
procedures.
100 Chapter 8
Ferrite clamp filters to
be attached
Scanner
interface
(DE-15)
USB
ports
Ethernet
port (RJ-45)
ferrite clamp filters
Alarm
Scanner
connection connection
Alarm and
I/O (DE-9)