Appendix B: Acquisition Module Description And Replacement Procedures; General Specifications - Olympus OmniScan MX User Manual

Appendix B: Acquisition Module Description and
Replacement Procedures
This appendix outlines the following items: the general specifications for the modules
and connectors, the procedure for replacing and connecting an acquisition module
used with the OmniScan MX and OmniScan MX2 units, and the procedure for
cleaning a module fan filter.
B.1

General Specifications

Table 31 on page 130 lists the general specifications common to all acquisition
modules, except the OMNI-M2-PA1664, OMNI-M2-PA16128, OMNI-M2-PA32128
and OMNI-M2-PA32128PR modules. For general specifications for the OMNI-M2-
PA1664, OMNI-M2-PA16128, OMNI-M2-PA32128 and OMNI-M2-PA32128PR
modules, see Table 32 on page 130. Finally, Table 33 on page 131 lists the general
specifications for the OMNI-M2-UT-2C module.
Acquisition Module Description and Replacement Procedures
DMTA-20015-01EN [U8778402], Rev. M, February 2017
129