Warnings - Olympus OmniScan MX User Manual

Warnings

WARNING
General Warnings
• Carefully read the instructions contained in this instruction manual prior to
turning on the instrument.
• Keep this instruction manual in a safe place for further reference.
• Follow the installation and operation procedures.
• It is imperative to respect the safety warnings on the instrument and in this
instruction manual.
• If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment could be impaired.
• Do not install substitute parts or perform any unauthorized modification to the
instrument.
• Service instructions, when applicable, are for trained service personnel. To avoid
the risk of electric shock, do not perform any work on the instrument unless
qualified to do so. For any problem or question regarding this instrument, contact
Olympus or an authorized Olympus representative.
• Do not touch the connectors directly by hand. Otherwise, a malfunction or electric
shock may result.
• Do not allow metallic or foreign objects to enter the device through connectors or
any other openings. Otherwise, a malfunction or electric shock may result.
WARNING
Electrical Warnings
• Before operating this instrument using mains electricity, you must connect the
protective earth terminal of the instrument to the protective conductor (mains) of
the power cord. The mains plug shall only be inserted into a socket outlet
provided with a protective earth contact. Never negate the protective action by
using an extension cord (power cable) without a protective conductor
(grounding).
DMTA-20015-01EN [U8778402], Rev. M, February 2017
Important Information — Please Read Before Use 13