Figure N-4 Module With Pa Connector Cap - Olympus OmniScan MX User Manual

NOTE
Before using a phased array probe that is not equipped with an EZ Latch connector,
remove the anchor base, which is secured by two screws.
You can also attach accessories to these acquisition modules using the fastening holes
(see Figure N-5 on page 190).
OMNI-M2-PA1664/16128/32128/32128PR Module Specifications

Figure N-4 Module with PA connector cap

DMTA-20015-01EN [U8778402], Rev. M, February 2017
PA connector
cap
189