Equipment Disposal; Ce (European Community) - Olympus OmniScan MX User Manual

Multitechnology flaw detector
Hide thumbs Also See for OmniScan MX:
Table of Contents

Advertisement

Do not drop, hit, or otherwise abuse a battery, as doing so could expose the cell
contents, which are corrosive and explosive.
Do not short-circuit the battery terminals. A short circuit could cause injury and
severe damage to a battery making it unusable.
Do not expose a battery to moisture or rain; doing so could cause an electric
shock.
Only use the OmniScan MX or OmniScan MX2 unit or an external charger
approved by Olympus to charge the batteries.
Only use batteries supplied by Olympus.
Do not store batteries that have less than 40 % remaining charge. Recharge
batteries to between 40 % and 80 % capacity before storing them.
During storage, keep the battery charge between 40 % and 80 %.
Do not leave batteries in the OmniScan MX or OmniScan MX2 unit during
instrument storage.

Equipment Disposal

Before disposing of the OmniScan MX or OmniScan MX2, check your local laws,
rules, and regulations, and follow them accordingly.

CE (European Community)

This device complies with the requirements of both directive
2014/30/EU concerning electromagnetic compatibility and directive
2014/35/EC concerning low voltage. The CE marking indicates
compliance with the above directives.
DMTA-20015-01EN [U8778402], Rev. M, February 2017
Important Information — Please Read Before Use
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omniscan mx2

Table of Contents