Appendix A: Technical Specifications; Table 17 General En15317 Specifications - Olympus 45MG User Manual

Appendix A: Technical Specifications

Parameter
Size
Weight
Power supply types
Probe socket types
Battery operating time
Operating temperature
Battery storage temperature
Battery indicator
Pulse repetition frequency
(PRF)
Alarm indicators
Thru coating
Minimum and maximum
thickness

Table 17 General EN15317 specifications

Height × Width × Depth (without protective boot):
162.0 mm × 91.1 mm × 41.1 mm
(6.38 in. × 3.59 in. × 1.62 in.)
430.9 g (0.95 lb)
Three AA-size batteries: Alkaline (nonrechargeable), NiMH
(externally rechargeable), or lithium (nonrechargeable)
Dual LEMO with center pin IP67
For continuous measurement at an update rate of 4 Hz with
the backlight set to 20 %:
Alkaline (nonrechargeable) 20–21 hours
NiMH (externally rechargeable) 22–23 hours
Lithium (nonrechargeable) 35–36 hours
−10 °C to 50 °C (14 °F to 122 °F)
−20 °C to 40 °C (−4 °F to 104 °F)
Five-step battery charge level indication
1 kHz burst
Measurement rates: 4 Hz, 8 Hz, 16 Hz, and Fast or Max (up to
20 Hz)
Visual high-alarm and low-alarm indicators with audio tone
Echo-to-echo and THRU-COAT measurements
Single element: 0.1 mm to 635.0 mm (0.004 in. to 25.0 in.)
Dual element: 0.5 mm to 635.0 mm (0.020 in. to 25 in.)
Note: The exact thickness range depends on the transducer
type and measurement mode used.
DMTA-10022-01EN, Rev. C, January 2015
Value
Technical Specifications 209