Ip Max-Route-Entries; Ip Netbios-Rebroadcast - Avaya P460 Reference Manual

To restore the maximum number of ARP cache entries to its default:
Router-1(configure)# no ip max-arp-entries

ip max-route-entries

User level: read-write, admin.
The ip max-route-entries command exists for compatibility with Avaya™
P550. There is no limitation on the size of the routing table, except for the amount of
available memory.
Use the no ip max-route-entries command to remove the limitation.
The syntax for this command is:
[no] ip max-route-entries <value>
value
Example:
Router-1(configure)# ip max-route-entries 4000

ip netbios-rebroadcast

User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode.
Use the ip netbios-rebroadcast command to set the NETBIOS rebroadcasts
mode on an interface.
Use the no ip netbios-rebroadcast command to disable NETBIOS
rebroadcasts on an interface.
The syntax for this command is:
[no] ip netbios-rebroadcast <mode>
The possible values of mode are:
both
Avaya P460 Reference Guide
number of entries
Netbios packets received on the interface
rebroadcasted to other interfaces and netbios packets
received on other interfaces are rebroadcasted into
this interface.
Chapter 2 Avaya P460 CLI Commands
41