D-Link xstack DGS-3620 series Reference Manual page 9

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
In addition, after typing any given command plus one space, users can see all of the next possible
sub-commands, in sequential order, by repeatedly pressing the Tab key.
To re-enter the previous command at the command prompt, press the up arrow cursor key. The
previous command will appear at the command prompt.
DGS-3620-28PC:admin#config account
Command: config account
Next possible completions:
<username 15>
DGS-3620-28PC:admin#
In the above example, the command config account was entered without the required parameter
<username>, the CLI returned the Next possible completions: <username> prompt. The up
arrow cursor control key was pressed to re-enter the previous command (config account) at the
command prompt. Now the appropriate username can be entered and the config account
command re-executed.
All commands in the CLI function in this way. In addition, the syntax of the help prompts are the
same as presented in this manual − angle brackets < > indicate a numerical value or character
string, braces { } indicate optional parameters or a choice of parameters, and brackets [ ] indicate
required parameters.
If a command is entered that is unrecognized by the CLI, the top-level commands will be displayed
under the Available commands: prompt.
DGS-3620-28PC:admin#the
Available commands:
..
cfm
copy
delete
enable
login
no
reboot
save
traceroute6
DGS-3620-28PC:admin#
The top-level commands consist of commands such as show or config. Most of these commands
require one or more parameters to narrow the top-level command. This is equivalent to show what?
or config what? Where the what? is the next parameter.
For example, entering the show command with no additional parameters, the CLI will then display
all of the possible next parameters.
DGS-3620-28PC:admin#show
?
change
create
dir
erase
logout
ping
reconfig
show
upload
4
cable_diag
clear
debug
disable
format
md
ping6
rename
telnet
cd
config
del
download
install
move
rd
reset
traceroute