Gambro AK 95 S Service Manual page 92

Diagnostic flow diagram
To use all facilities in the Diagnostic Selection
Menu, a Gambro training course is recom-
mended.
WARNING! In Diagnostics it is possible to
make settings far outside normal limits and
technical errors may appear. For more informa-
tion, contact Gambro Service.
COMMUNICATION PORT TRANSMIT TEST
Press HOLD to abort
I2C TRANSD
SELECT Scan
SCANNING I2C EEPROMS
I2C EEPROM SCAN COMPLETED
Name of the
transducer:
XXXXX EEPROM
XXXXX EEPROM
AK 95 / AK 95 S Service Manual
HCEN 9136 Rev. 10.2005
DIAGNOSTICS SYSTEM MENU
COM
ADDRESS ERROR
Update Escape
NOT INITIALIZED
Init Escape
SELECT SERVICE MODE
Exit Calib
DIAGNOSTICS SELECTION MENU
System
I2C Errors
TECHNICAL ERROR SUPPORT SELECT
View is the same as in Internal logging, see
Error buffers in logging mode.
Select Erase if you want to erase errors from a
buffer.
ERASING DIAGNOSTIC BUFFER
Press SELECT to confirm
Press SELECT to confirm.
DIAGNOSTIC ERROR BUFFER ERASED
Service Technicians Guide
Utility Diagnose
BM FM
See
"FM diagnostics"
See
"BM diagnostics"
View Erase
4:19