Gambro AK 95 S Service Manual page 83

Service Technicians Guide
Default preset
SELECT PRESET TYPE
Manual PC Default
When selecting the last "group" "Default preset"
following display appears:
SELECT DEFAULT PRESET TYPE
Complete Partly
Complete
Complete default means that all presets are
initiated to the default values.
Select "Complete" with the SET knob and press
the SELECT key following display appears:
WARNING!!! ALL PRESETS WILL BE
STORED AS DEFAULT VALUES
Press the HOLD key and the machine returns to
the first display in Manual preset mode.
Press START/UF/STOP key and all presets will
be initiated to the default values.
When ready the machine returns to the first
display in Manual preset mode.
Partly
Partly default sets all values to default values
except the values for concentrates that remain
intact.
Select "Partly" with the SET knob and press the
SELECT key following display appears:
WARNING!!! SOME PRESETS WILL BE
STORED AS DEFAULT VALUES
Press the HOLD key and the machine returns
to the first display in Manual preset mode.
Press START/UF/STOP key and all presets
except the concentrate presets will be initiated
to the default values.
When ready the machine returns to the first
display in Manual preset mode.
Note! When selecting Default preset, AK 95 will
perform a Chem Rinse at the next start up.
4:10
Finish of Preset
To complete the Presets menu, press
backwards until following display shows up:
MAINTENANCE SUPPORT SELECTION
Fch Preset
Set Fch and press
check.
NOTE!
•All preset values and limits must be verified
before treatment start.
•Preset concentrates must be verified by
laboratory test of the dialysate produced by the
AK 95 S.
•Preset for pump segments must be verified by
comparing the pumped volume and a reference
volume.
to step
Service
to perform a Functional
AK 95 / AK 95 S Service Manual
HCEN 9136 Rev. 10.2005