Unpacking And Inspection - Gambro AK 95 S Service Manual

Installation Guide
Installation
Unpacking and
inspection
When unpacking, the equipment should be
checked. If the equipment is in any way dam-
aged, proper operation cannot be guaranteed.
Please contact your Gambro Service
representative.
The packages contain the units and components
shown in Figure 1.
Figure 1. AK 95 S Units.
Ensure that the specified equipment has been
delivered. Do the packages contain the specified
monitor and options? Are there any units/
components missing? Check the additional
packing list (inside the additional package box).
If in doubt, please contact your Gambro Serv-
ice representative.
Ensure that the voltage specified on the voltage
tag matches the mains voltage. If in doubt,
please contact your Gambro Service
representative.
1:2
Environment and
Physical Data
The AK 95 S can be installed in most environ-
ments if certain conditions as the temperature,
relative humidity, mains voltage etc. are met.
Operating Environment
AK 95 S:
Ambient temperature:
Relative humidity:
Air pressure:
AK 95:
Ambient temperature:
Relative humidity:
Air pressure:
Transport and Storage Environment
Units being transported or stored must be kept
in their original packaging. Units must be
handled en route in accordance with special
instructions. Units can be transported or stored
in the following environment for up to 15 weeks:
Ambient temperature:
Relative humidity:
Air pressure:
Note! Units to be transported and/or stored for
more than 15 weeks may only be subjected to
the conditions specified under Operating Envi-
ronment.
Physical Data
AK 95 S:
Depth Width
mm mm
600 480
Machine
625 580
Stand
AK 95:
Depth Width
mm mm
420 350
Machine
680 625
Stand
+18 °C to + 35 °C
15 % - 85 %
70 - 106 kPa
+10°C to + 35 °C
30% - 85 %
70 - 106 kPa
-20 °C to +70 °C
10 % - 96 %
50 - 106 kPa
Height Weight
mm kg
1270 78
(all options
included)
Height Weight
mm kg
1270 62
AK 95 / AK 95 S Service Manual
HCEN 9133 Rev. 01. 2004