How To Remove The Cover To Connect The Battery - Gambro AK 95 S Service Manual

How to remove the cover to connect
the battery.
1. Loosen the three cover bolts, accessible
underneath the fluid part.
2. Move the cover upwards and then back-
wards.
3. Pull the cover to the right just 10 mm (if you
are positioned in front of the AK 95 S).
4. Turn the cover backwards counter-clockwise
to pass the circuit boards and the cover can
be removed.
5. Connect the rechargeable battery to board
connector P205 on the Protective Driver
board.
AK 95 / AK 95 S Service Manual
HCEN 9133 Rev. 01. 2004
A
Cover
Front
A
Acet ate
A
Installation Guide
B
A
1:5