Checklist - Gambro AK 95 S Service Manual

Checklist -

Unpacking and inspection
Yes
Ensure that the specified equipment
has been delivered.
Check that the additional package box
contains the specified components.
Check, by visual inspection that the
machine shows no sign of damage.
Environment and Physical Data
Ensure that the Operating Environment
is according to the specifications.
Interconnection
Ensure that the monitors are intercon-
nected correctly.
Top Tray
Ensure that the top tray is placed at
the top of the machine.
Connection to the Water Supply
Ensure that the machine is correctly
connected to the Water Supply.
Ensure that the water fulfils all require-
ments set out under Environment and
Physical Data.
Ensure that the machine is correctly
connected to the drain.
This record is to be signed and filed by the Service Engineer responsible for the installation.
Date............................Signature........................................................................
Serial number: ..................................
AK 95 / AK 95 S Service Manual
HCEN 9133 Rev. 01. 2004
Check if applicable
Note! If you have any remarks during installa-
tion, please contact your Gambro Service
representative.
Connection to the Power Supply
Ensure that the voltage specified on the
voltage tag matches the mains voltage.
Ensure that the machine is correctly
connected to the Power Supply.
Mains power must be connected to a
grounded power socket.
Connection of the Battery
Ensure that the rechargeable 9V battery is
correctly connected according to the instruc-
tions.
Connection of the dialysis fluid tubes
Ensure that the dialysis fluid tubes are
connected to the safety couplings.
Start-up procedure
Ensure that the recommended
start-up procedure is followed.
Out of box report
Fill out the Installation / Out of
Box report and return it to:
Gambro Lundia AB
Monitor Division
Magistratsvägen 16
PO Box 10101
SE-220 10 Lund
Sweden
Installation Guide
1:11