Display Nqa Reaction Counters - HP MSR1003-8S Command Reference Manual

Table 6 Command output
Field
Index
TTL
Response
Hop IP
Status
Time

display nqa reaction counters

Use display nqa reaction counters to display the current monitoring results of reaction entries.
Syntax
display nqa reaction counters [ admin-name operation-tag [ item-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag.
The admin-name argument represents the name of the administrator who creates the NQA operation.
The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive
string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an NQA operation, the
command displays the current monitoring results of reaction entries for all NQA operations.
item-number: Specifies a reaction entry by its ID in the range of 1 to 10. If you do not specify a reaction
entry, the command displays the results of all reaction entries.
Usage guidelines
The result fields display hyphens (-) in one of the following conditions:
The threshold type is the average value.
•
The monitored performance metric is ICPIF or MOS of the voice operation.
•
The monitoring results of an operation are accumulated, and are not cleared after the operation
completes.
Description
History record ID.
The history records in one UDP tracert operation have the same ID.
TTL value in the probe packet.
Round-trip time if the operation succeeds, timeout time upon timeout, or 0 if the
operation cannot be completed, in milliseconds.
IP address of the node that sent the reply packet.
Status of the operation result:
•
Succeeded.
•
Unknown error.
•
Internal error.
•
Timeout.
Time when the operation was completed.
20